UK Power Distribution: Application for an Electricity Connection

Complete all relevant sections of the application form. Attach the necessary site plans and additional documents as specified. Submit the form and accompanying documents to UK Power Distribution, 6500 Daresbury Park, Warrington, Cheshire, WA4 4GE. Alternatively, you can fax to 0844 74 000 74 or email to newconnections@ukpowerdistribution.co.uk. Ensure all details are accurate to avoid delays in processing.

Ensure to submit your application well in advance to accommodate any required processing time. Always check with UK Power Distribution for specific deadlines or important dates regarding your application.

The purpose of this form is to provide applicants with a standardized method for requesting a new or altered electricity connection from UK Power Distribution. It gathers all necessary information about the applicant, the site, and the type of supply required. By completing and submitting this form, you initiate the process for securing a reliable and efficient electricity connection, ensuring that your property or project has the power it needs to operate smoothly.

• 1. Type of Supply: Indicate the type of supply required (new connection, temporary supply, additional load, etc.).
• 2. Applicant Details: Provide details about the applicant including company name, contact information, and address.
• 3. Site Contact Details: Enter the contact details of the site manager or representative.
• 4. Site Information: Fill in the site address, proposed number of dwellings, type of buildings, and other relevant site details.
• 5. Heating Type: Specify the heating type for the properties (electric, gas, etc.).
• 6. Meter Position: Indicate the preferred position of the meter (internal or external).
• 7. Electrical Load Details: Provide details about the electrical load, including heating types, motors, and other significant loads.
• 8. Maximum Power Required: State the total maximum power required in kVA and the power required at each meter point.
• 9. Generation Equipment: Indicate if generation equipment will be installed and whether it will generate electricity back into the network.
• 10. Existing Supplies Information: Provide information about any existing electricity supplies at the site.
• 11. Construction Design & Management: Indicate whether the project is notifiable under CDM regulations and provide details of the appointed construction co-ordinator if applicable.
• 12. Acceptance & Payment Details: Enter the details of the person responsible for accepting and paying for the quotation.
• 13. Declaration: Acknowledge the charges and confirm the inclusion of necessary documents and information with the application.

Failing to submit this form may result in delays or inability to secure the required electricity connection.

• Delays: Your electricity connection may be delayed.
• Disconnection: Existing connections that need to be altered might not be serviced.
• Project Impact: Construction projects may be impacted due to lack of power supply.
• Additional Costs: Additional charges may be incurred for delay-related issues.
• Compliance Issues: Failure to comply with submission requirements could result in regulatory issues or penalties.

• 1. New Connection: Request a new electricity supply for a property.
• 2. Temporary Supply: Apply for a temporary electricity supply for construction or other short-term needs.
• 3. Additional Load: Request an increase in load capacity for existing connections.
• 4. Service Alteration: Apply for changes to existing service connections.
• 5. DNO/ICP for Adoption: Request for distribution network operator or independent connection provider adoption.